| |
|
|
|
|
| |
ZG01 |
ZG02C |
 |
 |
|
Small Module for OEM |
|
Mode FuntionIt use NDIR technology to improve the long termstability |
|
Cost - effective CO2 monitors made with IR-SOC technology |
|
|
|
| |
Small Module |
Calibration Tube |
CO2 Entry Hole
(On the 2 sides of the module) |
|
|
|
|
|
|
|
| |
|
|
| |
|
| Model |
ZG01 |
ZG02C |
| Sample Method |
Diffusion or flow through (0.05~0.2l/min)
|
Diffusion or flow through (1~0.2l/min) |
|
0~3,000ppm/ 0.3% |
| Operating TempRange |
| 32 to 122° F (0-50°C) 0-95% RH,non-condensing |
|
| Storage Range |
-20~60C,95%RH |
|
| Accuracy |
| CO2 Accuracy |
+/-50ppm or 5% of reading
|
| Ambient Temperature |
| Accuracy |
|
+/-1.0°C |
| Calibration Interval |
| 12 months, offset adjustment using single gas at 0-1000 ppm CO2 under |
| UcaliMode. |
|
| Pressure Dependence |
0.13% of reading per mm Hg |
| Repeatibility |
20ppm |
20ppm (defined as standard
deviation of 10 readings in one minutes 400ppm) |
| Resolution |
1ppm |
|
| Outputs |
| Output Interface |
6pin Vertical Connector,Space=2.54mm
|
10 pin Vertical Connector,Space=2.54mm |
| Digital Output |
CO2 & Tamb in ZyAura Protocol |
RS232 output |
| OC (Open Collector) |
| Output |
|
Y (CntRHL:=High Limit) |
-- |
| Analog Output |
-- |
4~20mA(max Rload =200ohm), 0~4.096V |
|
| Power Supply |
| AC/DC Supply |
|
-- |
| DC Supply |
-- |
9~15VDC |
|
| Warm Up & Respone |
| Response Time #R1 |
| (63% RiseTime) |
|
<1min
|
|
<60 sec |
| Update Period |
7 sec |
| Warm Up Time |
| (Ambient Temp) |
|
20~30min |
| Dimension |
118x28x20mm (4.65x1.10x0.79 inch) |
| Weight |
49g (1.73 oz) |
| Sensor Life |
>2Years |
|
|
|
|
|
|
